Globe Valve: Typically used in pipelines, these consist of two halves of a valve body, separated by an internal baffle, where a plug closes in between the baffle. Gate Valve: These have a planar sealing surface between the valve gate and the valve seats, used when a straight line flow is required with minimum restriction. This new feature makes that unnecessary.Īngle Valve: This is common in the oil/gas, power and shipbuilding industries, consisting of a controlled valve door around a 90 degree bend.īall Valve: Consisting of a rotary valve ball, this valve is also commonly used in many industries.īutterfly Valve: Consisting of a rotating disc, either flat or lenticular in nature, used in applications which require bi-direction tight shut-off.ĭiaphragm Valve: These consist of a rubber or plastic membrane which is pushed down to shut off flow in many process systems. With earlier versions of PIPENET Transient module, it was necessary for the user to input the valve characteristics themselves. The range of built-in valve models has been enhanced to provide powerful facilities. This is a new way of working with PIPENET’S operating valve in the Transient module, making the modelling of many common types of valve considerably easier. When the pressure on the plug increases above a specified set pressure, the valve opens until the flow pressure reaches the valve’s fully open pressure. The valve consists of a plug situated ahead of a spring or similar device. Safety valve These are used to protect the system from pressure surges.
#4shared pipenet 1.7 generator
PIPENET Spray/Sprinkler NFPA Report Generator has been enhanced following the release of the 2013 edition of the NFPA 13 rules. PIPENET Vision® 1.7.1 Spray/Sprinkler Module Enhanced Report Generator PIPENET Vision® 1.7 represents the next step in the PIPENET Vision family, bringing in all-new calculation capabilities along with other feature enhancements.
0 kommentar(er)
